Author Topic: C13 Cat Check eng SPN 2954 Intake actuator high current  (Read 248 times)

0 Members and 1 Guest are viewing this topic.

Offline Yellowstone22

  • Newbie
  • *
  • Posts: 1
C13 Cat Check eng SPN 2954 Intake actuator high current
« on: July 15, 2020, 11:13:06 AM »
Hey Dave
I have gotten several of these error messages on my Silver Leaf monitor.

Engine was cold, just pulling out of my driveway.  I have pulled over doing some research.  Not seeing additional codes as it is at idle.
 Looking for advice as to what to do next.

Gary Park, Dallas Center, Ia

Offline David.e.atherton

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 321
Re: C13 Cat Check eng SPN 2954 Intake actuator high current
« Reply #1 on: July 15, 2020, 08:08:45 PM »
Yellowstone13, first order I would suggest remove valve cover and look for loose connections or damage wiring on valve actuators. The only part of operation that be of concern is at startup
warm up other wise not an out service. I can provide you a break out of the actuator if you
cannot find any loose connections or torn wires. Ask Dave, Dave Atherton Retired Cat Mechanic